Uso de residuos sólidos en la elaboración de concreto celular: una revisión
una revisión
DOI:
https://doi.org/10.32911/as.2021.v14.n1.714Keywords:
cellular concrete, foamed concrete, autoclaved aereated concrete, solid waste, mechanical propertiesAbstract
Millions of tons of different types of waste are generated each year worldwide and this is expected to increase in the future. Most of this waste is dumped through landfills or incineration, raising major environmental concerns. An alternative for the reuse of these wastes is to incorporate them as partial or total replacements for the components of cellular concrete. In this regard, aerated concrete could provide an excellent means of incorporating these residues in a large volume mainly due to the low strength requirement. Cellular concrete is classified into two types based on its manufacturing method, the air entrainment method and the foaming method. Therefore, this document collects and reviews the use of various types of waste, such as industrial solid waste and agricultural solid waste, as a potential replacement for cement, fine aggregate or foaming agent in aerated concrete. and foamed. Each type of waste contributes differently to the performance of cellular concrete; generally incorporating the waste materials can produce a cellular concrete with low density, with an increase in the compressive strength and improvements in the thermal insulation properties.
Downloads
References
Alengaram, U. J.; Al Muhit, B. A.; Jumaat, Z. y Liu, M. Y. J. 2013. «A comparison of the thermal conductivity of oil palm shell foamed concrete with conventional materials». Materials and Design 51: 522-529 <10.1016/j.matdes.2013.04.078>
Amran, Y. H. M; Farzadnia, N. y Abang Ali, A. A.. 2015. «Properties and applications of foamed concrete; a review». Construction and Building Materials 101, Part 1: 990-1005.
Awang, Hanizam y Aljoumaily, Zaid. 2017. «Influence of granulated blast furnace slag on mechanical properties of foam concrete». Cogent Engineering 4: 1-14.
Bayuaji, Ridho. 2015. «The influence of microwave incinerated rice husk ash on foamed concrete workability and compressive strength using Taguchi Method». Jurnal Teknologi (Sciences & Engineering) 75, nº 1: 265-274.
Bing, Chen; Zhen, Wu y Ning, Liu. 2012. «Experimental Research on Properties of High-Strength Foamed Concrete». Journal of Materials in Civil Engineering 24, nº 1: 113-118.
Chandni, T. y Anand K. 2018. «Utilization of Recycled Waste as Filler in Foam concrete». ». Journal of Building Engineering 19: 154-160.
Chauhan, M. K.; Varun; Chaudhary, S.; Kumar, S. y Samar. 2011. «Life cycle assessment of sugar industry: A review». Renewable and Sustainable Energy Reviews 15, nº 7: 3445-3453.
Chen, Ying-Chu. 2018. «Evaluating greenhouse gas emissions and energy recovery from municipal and industrial solid waste using waste-to-energy technology». Journal of Cleaner Production 192: 262-269.
Drochytka, R. y Helanová, E. 2015. «Development of Microstructure of the Fly Ash Aerated Concrete in time». Procedia Engineering 108: 624-631. <10.1016/j.proeng.2015.06.189>
El-Didamony, H.; Amer, A. A.; Mohammed, M. S. y El-Hakim, M. A. 2019. «Fabrication and properties of autoclaved aerated concrete containing agriculture and industrial solid wastes». Journal of Building Engineering 22: 528-538. <10.1016/j.jobe.2019.01.023>
Gelim, M. y Ali, Khadin. 2011. «Mechanical and physical properties of fly ash foamed». M.Sc. Thesis, Department of Civil Engineering, University Tun Hussein Onn Malaysia. <https://www.semanticscholar.org/paper/Mechanical-and-physical-properties-of-fly-ash-Gelim-Ali/a9b7548d787ccf8cfd3e73688ef3aed71735b515> [Consulta: 13-12-2020].
Hadipramana, Josef; Samad, Abdul Aziz A.; Zaidi, Ahmad Mujahid A.; Mohamad, Noridah y Riza, Fetra Venny. 2014. «Contribution of RHA Granules as Filler to Improve the Impact Resistance of Foamed Concrete». Key Engineering Materials Vol 594-595: 93-97. <10.4028/www.scientific.net/KEM.594-595.93>
Hamad , Ali J. 2014. «Materials, Production, Properties and Application of Aerated Lightweight Concrete: Review». International Journal of Materials Science and Engineering 2: 152-157.
Hamada, Hussein M.; Jokhio, Gul A.; Yahaya, Fadzil M.; Humada, Ali M. y Gul, Yasmeen. 2018. «The present state of the use of palm oil fuel ash (POFA) in concrete». Construction and Building Materials 175: 26-40. <10.1016/j.conbuildmat.2018.03.227>
Harith, Iman. 2018. «Study on polyurethane foamed concrete for use in structural applications». Case Studies in Construction Materials 8: 79-86.
Hendawitharana, S. y Nanayakkara, S. 2018. «Use of Bottom Ash from Coal Fired Thermal Power Plants in Production of Cellular Lightweight Concrete». Moratuwa Engineering Research Conference, 209-214. <10.1109/MERCon.2018.8421957>
Hussein, A. A. E.; Shafiq, N. y Nuruddin, M. F. 2014. «Effects of microwave incinerated rice husk ash (Mirha) on hydratio characteristic and mechanical properties of foamed concrete». Advanced Materials Research 935 : 193-196. <10.4028/www.scientific.net/AMR.935.193>
Ikponmwosa, Efe; Fapohunda, Christopher; Kolajo; Olamiposi y Eyo, Otu. 2017. «Structural behaviour of bamboo-reinforced foamed concrete slab containing polyvinyl wastes (PW) as partial replacement of fine aggregate». Journal of King Saud University - Engineering Sciences 29, nº 4: 348-355.
Jitchaiyaphum, K.; Sinsiri, T. y Chindaprasirt, P. 2011. «Cellular Lightweight Concrete Containing Pozzolan Materials». Procedia Engineering 14: 1157-1164. <10.1016/j.proeng.2011.07.145>
Kadir, Aeslina; Hassan, Mohd; Sarani, Noor; Yatim, Fatin y Jaini, Zainorizuan. 2017. «A practical approach for solving disposal of rubber waste: Leachability of heavy metals from foamed concrete containing rubber powder waste (RPW)». Electronic and Green Materials International Conference Vol 1885, n° 020081.
Kalpana, M. y Mohith, S. 2020. «A study on compressive behavior of AAC added with industrial waste». Materials Today: Proceedings 22: 1043-1046.
Kashani, A.; Ngo, T.; Hemachandra, P. y Hajimohammadi, A. 2018. «Effects of surface treatments of recycled tyre crumb on cement-rubber bonding in concrete composite foam». Construction and Building Materials 467-473: 467-473.
Kashani, A.; Ngo, T.; Mendis, P.; Black, J. y Hajimohammadi A. 2017. «A sustainable application of recycled tyre crumbs as insulator in lightweight cellular concrete». Journal of Cleaner Production 149: 925-935.
Krishnan, Gokul y Anand, K. 2018. «Industrial waste utilization for foam concrete». Materials Science and Engineering 310, nº 1: 012062. <10.1088/1757-899X/310/1/012062>
Kunchariyakun, K.; Asavapisit, S. y Sombatsompop, K. 2015. «Properties of autoclaved aerated concrete incorporating rice husk ash as partial replacement for fine aggregate». Cement and Concrete Composites 15: 11-16.
Kunchariyakun, K.; Asavapisit, S. y Sinyoung, S. 2018. «Influence of partial sand replacement by black rice husk ash and bagasse ash on properties of autoclaved aerated concrete under different temperatures and times». Construction and Building Materials 173: 220-227. <10.1016/j.cemconcomp.2014.07.021 >
Lim, S. K.; Tan, C. S.; Lim, O. Y. y Lee, Y. L. 2013. «Fresh and hardened properties of lightweight foamed concrete with palm oil fuel ash as filler». Construction and Building Materials 46: 39-47. <10.1016/j.conbuildmat.2013.04.015>
Liu, M. Y. J.; Alengaram, U. J.; Santhanam, M.; Jumaat, M. Z. y Mo, K. H. 2016. «Microstructural investigations of palm oil fuel ash and fly ash based binders in lightweight aggregate foamed geopolymer concrete». Construction and Building Materials 120: 112-122. <10.1016/j.conbuildmat.2016.05.076>
Ma, Bao-guo; Cai, L.-X.; Li, Xiang-guo y Jian, S. 2016. «Utilization of iron tailings as substitute in autoclaved aerated concrete: physico-mechanical and microstructure of hydration products». Journal of Cleaner Production 127: 162-171.
Maddah, Hisham. 2016. «Polypropylene as a Promising Plastic: A Review». American Journal of Polymer Science 6, nº 1: 1-11. <10.5923/j.ajps.20160601.01>
Makul, N. y Sua-iam, G. 2016. «Characteristics and utilization of sugarcane filter cake waste in the production of lightweight foamed concrete». Journal of Cleaner Production 126: 118-133. <10.1016/j.jclepro.2016.02.111>
Mohammed, J. y Hamad, A. 2014. «Materials, properties and application review of lightweight concrete». Revista Tecnica de la Facultad de Ingenieria Universidad del Zulia 37, no. 2: 10-15. [Consulta: 13-12-2020].
Munir, Abdul; Abdullah; Huzaim; Sofyan; Irfandi y Safwan. 2015. «Utilization of palm oil fuel ash (POFA) in producing lightweight foamed concrete for non-structural building material». Procedia Engineering 125: 739-746. <10.1016/j.proeng.2015.11.119>
Muthu Kumar, E. y Ramamurthy, K. 2017. «Influence of production on the strength, density and water absorption of aerated geopolymer paste and mortar using Class F fly ash». Construction and Building Materials 156: 1137-1149.
Nambiar, K. y Ramamurthy, K 2007. «Air‐void characterisation of foam concrete». Cement and Concrete Research 37, nº 2: 221-230. <10.1016/j.cemconres.2006.10.009>
Nambiar, K. y Ramamurthy, K. 2006. «Influence of filler type on the properties of foam concrete». Cement & Concrete Composites 28, nº 5: 475-480. <10.1016/j.cemconcomp.2005.12.001>
Nambiar, K. y Ramamurthy, K. 2007. «Sorption characteristics of foam concrete». Cement and Concrete Research 37, nº 9: 1341-1347. <10.1016/j.cemconres.2007.05.010>
Onprom, P.; Chaimoon, K. y Cheerarot, R. 2015. «Influence of Bottom Ash Replacements as Fine Aggregate on the Property of Cellular Concrete with Various Foam Contents». Advances in Materials Science and Engineering 2015, nº 381704: 1-11. <10.1155/2015/381704>
Özbay, E.; Erdemir, M. y Durmus, H. 2016. «Utilization and efficiency of ground granulated blast furnace slag on concrete properties - A review». Construction and Building Materials 105: 423-434. <10.1016/j.conbuildmat.2015.12.153>
Pachideh, G. y Gholhaki, M. 2019. «Effect of pozzolanic materials on mechanical properties and water absorption of autoclaved aerated concrete». Journal of Building Engineering 26, nº 100856. <10.1016/j.jobe.2019.100856>
Raj, A.; Sathyan, D. y Mini, K. M. 2019. «Physical and functional characteristics of foam concrete: A review». Construction and Building Materials 221: 787-799.
Reddy, K. C. y Kumar, S. Dinesh. 2017. «Effect of fly ash and aluminium powder on strength properties of concrete». Journalnx - a Multidisciplinary Peer Reviewed Journal 3, nº 7: 57-61.
Singh, N.; Mithulraj, M. y Arya, S. 2018. «Influence of coal bottom ash as fine aggregates replacement on various properties of concretes: A review». Resources, Conservation and Recycling 138: 257-271. <10.1016/j.resconrec.2018.07.025>
Sofi, A. 2018. «Effect of waste tyre rubber on mechanical and durability properties of concrete - A review». Ain Shams Engineering Journal 9, nº 4: 2691-2700. <10.1016/j.asej.2017.08.007>
Suksiripattanapong, C.; Krosoongnern, K.; Thumrongvut J.; Sukontasukkul, P.; Horpibulsuk, S. y Chindaprasirt, P. 2020. «Properties of cellular lightweight high calcium bottom ash-portland cement geopolymer mortar». Case Studies in Construction Materials 12: e00337. <10.1016/j.cscm.2020.e00337>
Thomas, Blessen. 2018. «Green concrete partially comprised of rice husk ash as a supplementary cementitious material - A comprehensive review». Renewable and Sustainable Energy Reviews. <10.1016/j.rser.2017.10.081>
Tian, Y. 2011. «Experimental Study on Aerated Concrete Produced by Iron Tailings». Advanced Materials Research 250-253: 853-856. <10.4028/www.scientific.net/AMR.250-253.853>
Wang, B.; Dong F.; Chen, M. y Zhu, J. 2016 «Advances in recycling and utilization of agricultural wastes in China: Based on environmental risk, crucial pathways, influencing factors, policy mechanism». Procedia Environmental Sciences 31: 12-17. <10.1016/j.compositesb.2019.107076>
Wongkeo, W.; Thongsanitgarn, P.; Pimraksa, K. y Chaipanich, A. 2012 «Compressive strength, flexural strength and thermal conductivity of autoclaved concrete block made using bottom ash as cement replacement materials». Materials and Design 35: 434-439. <10.1016/j.matdes.2011.08.046>
Wongkeo, W. y Chaipanich, A. 2010. «Compressive strength, microstructure and thermal analysis of autoclaved and air cured structural lightweight concrete made with coal bottom ash and silica fume». Materials Science and Engineering A 527, nº 16-17: 3676-3684. <10.1016/j.msea.2010.01.089>
Yao, Xingliang; Wang, W.; Liu, M.; Yonggang, Y. y Wu, S. 2019. «Synergistic use of industrial solid waste mixtures to prepare ready-to use lightweight porous concrete». Journal of Cleaner Production 211: 1034-1043. <10.1016/j.jclepro.2018.11.252>
Yao, Z; y otros. 2015. «A comprehensive review on the applications of coal fly ash.». Earth-Science Reviews 141: 105-121. <10.1016/j.earscirev.2014.11.016>
Zhao, Xiao; y otros. 2015. «Properties of Foamed Mortar Prepared with Granulated Blast-Furnace Slag.». Materials 8, nº 2: 462-473. <10.3390/ma8020462>
